Hornsby Bend Custom Cabinets
Home Bar Cabinetry in Hornsby Bend, TX
Custom home bar cabinetry built and installed in Hornsby Bend, TX. Wine storage, glass shelving, serving counters. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Hornsby Bend and nearby communities.
A lot of the home bar calls we get start with a bonus room or a converted garage corner that's been sitting empty since the drywall went up. Hornsby Bend Custom Cabinets builds bar cabinetry sized for that exact space, not a prefab unit that leaves a gap on one side or doesn't clear a low ceiling in an older addition.
Whether it's a wet bar off the kitchen or a standalone setup in a finished garage, we build the boxes, fit the counter, and wire in the lighting so the whole thing reads as one piece, not a furniture-store add-on.
What's included
What's Included with Home Bar Cabinetry
Optional Customer prep
- Typically included — Base cabinets sized to your wall or nook -.
- Glass or open shelving for stemware and bottles — Countertop fitting coordinated with cabinet height - Hardware and lighting install.
- Wine rack inserts for bottle storage
- Beverage fridge cutout and venting
- Glass display doors on upper cabinets
- Clear the area and confirm any existing plumbing or electrical nearby
- Have a rough idea of fridge or sink plans before the measure visit
Want a clearer scope?
Get a Free EstimateHow it works
How Our Home Bar Cabinetry Process Works
Step 1Concept Design
We talk through how you'll actually use the bar before sketching anything.
Step 2Layout Planning
Storage, serving counter, and seating space get mapped to your room.
Step 3Cabinet Fabrication
Boxes are built in the shop to hold bottles and bar gear securely.
Step 4Countertop Fitting
The counter gets set and leveled against the finished cabinet run.
Step 5Hardware Installation
Pulls and fixtures go on last so finishes stay clean during build.
Step 6Final Styling
We walk the space with you and adjust any shelf or lighting detail.
Materials
Materials and Methods for Home Bar Cabinetry
Bar cabinets take more day-to-day handling than most kitchen runs, so we lean on materials that hold up to spills and bottle weight.
Hardwood Bar Panels
Solid wood panels give the cabinet box enough strength to carry loaded shelves without sagging over years of use, which matters in converted garage spaces that see temperature swi
Glass Shelving Inserts
Tempered glass shelves show off glassware and bottles while staying easy to wipe down after a spill.
Wine Rack Inserts
Built-in racks keep bottles stored on their sides so corks don't dry out, a detail a lot of stock bar units skip.
Bar Hardware Finishes
Hardware gets matched to the room's existing fixtures so the bar doesn't look bolted on after the fact.
Lighting Accents
Under-shelf lighting highlights glassware and gives the counter enough task light for mixing drinks.
Custom Countertop Edges
We profile the counter edge to match the rest of the cabinetry instead of leaving a stock square edge.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Home Bar Cabinetry Take?
Most home bar projects move faster than a full kitchen since the footprint is smaller, but shop build time still drives the schedule.
- 01
Measure and design
3–5 days - 02
Shop fabrication
1–2 weeks - 03
Countertop and hardware fitting
2–3 days - 04
Install day
1 daycabinets set and secured on-site
Need a schedule that fits?
Get a Free EstimateBefore & after
Before and After Home Bar Cabinetry
Before 
After
FAQs
Home Bar Cabinetry FAQs
How much does home bar cabinetry cost in Hornsby Bend?
Most home bar builds run $4,000 to $12,000 depending on cabinet count, counter material, and whether a beverage fridge cutout is included. Your free estimate gives you an exact number for your space.
How long does a home bar cabinet install take?
Design and shop build typically run 2–3 weeks total, with install itself finishing in a single day once the boxes arrive.
Do I need a permit for a home bar?
Cabinet-only bar builds usually don't need a permit. If you're adding a sink, running new electrical for a fridge, or tying into plumbing, check with Travis County first.
Can I add a wine fridge to my home bar cabinets?
Yes. Tell us during the design phase so we can build the cutout and ventilation space into the cabinet layout from the start.
Is DIY home bar cabinetry a realistic option?
Basic open shelving on a wall is doable for a handy homeowner. Full cabinet runs with a fitted counter and hidden wiring are better left to a shop that can build the boxes square and level.
What finish holds up best on a home bar?
Sealed hardwood or moisture-resistant laminate stands up to spills and regular wiping better than raw wood or unsealed paint.
Next step
Get a Home Bar Cabinetry Estimate in Hornsby Bend
Call (325) 252-5168 or request a free estimate and we'll measure your space and talk through layout options before you commit to anything.
More services
Other Custom Cabinets services
Custom Kitchen Cabinets
Custom kitchen cabinets built to your actual wall dimensions in Hornsby Bend, TX. Hardwood boxes, soft-close hardware, free estimates.
Custom Kitchen Remodels
Custom kitchen remodels in Hornsby Bend, TX — layout changes, new cabinetry, counter coordination. Free estimates, built to your kitchen's real dimensions.
Built-In Shelving And Wall Units
Built-in shelving and wall units scribed to fit real walls in Hornsby Bend, TX. Media walls, libraries, office shelving. Free estimates.
Ask about Home Bar Cabinetry
Tell us about the project and how to reach you.